Bonavita Hudson Ii Lifestyle Crib Instructions Info

Step 2: Connect the FootboardRepeat the process for the footboard. Align the side rails with the footboard posts, insert the hardware, and tighten. Once all four corners are connected, go back and tighten all bolts firmly.

Are you or converting it to a toddler bed? bonavita hudson ii lifestyle crib instructions

Step 3: Install the Mattress Support FrameThe mattress support is a metal grid that holds the weight of the mattress and your baby. Most Hudson II models offer three height positions.Newborns: Use the highest setting to save your back while lifting the baby.Active Babies: Once your child can sit up, move it to the middle setting.Toddlers: Once your child can stand, use the lowest setting to prevent them from climbing out.Bolt the support frame into the brackets on the corner posts. Ensure the "Warning" labels on the support frame are facing upward. Step 2: Connect the FootboardRepeat the process for

Step 1: Attach the Side Rails to the HeadboardAlign the side rails with the pre-drilled holes on the headboard posts. Insert the wood dowels first to help with alignment. Use the provided bolts and the Allen wrench to secure the rails. Tighten them until they are snug, but do not fully torque them down yet; leaving a little "wiggle room" makes attaching the footboard easier. Are you or converting it to a toddler bed

What is the on the sticker (usually found on the bottom rail)?