Check Point devices have moved away from the traditional RJ45 serial port in favor of modern USB-C connectivity. While this simplifies the physical connection, getting your terminal emulator to talk to the hardware requires specific drivers and a bit of configuration.
Requires a specific driver package that supports Apple Silicon (M1/M2/M3) or Intel chips.
Right-click the installer (usually CP210xVCPInstaller_x64.exe ) and select Run as Administrator . checkpoint usb-c console driver
Plug your USB-C cable into the appliance's "Console" port and your laptop. Verify in Device Manager: Right-click the Start button > Device Manager . Expand Ports (COM & LPT) . Look for "Silicon Labs CP210x USB to UART Bridge." Note the COM port number (e.g., COM3 ). Terminal Emulator Settings
This guide covers everything you need to know about the Check Point USB-C console driver, from installation to troubleshooting common connection issues. Why Check Point Switched to USB-C Check Point devices have moved away from the
Ensure you are plugged into the port labeled , not the standard USB management ports. The driver is blocked (macOS) Go to System Settings > Privacy & Security .
📌 Search for SK113113 on the Check Point Support Center. This SecureKnowledge article contains the direct download links for all supported operating systems. Step-by-Step Installation (Windows) Right-click the installer (usually CP210xVCPInstaller_x64
Do not plug the appliance into your laptop yet. Download the ZIP: Grab the driver package from SK113113.