Flashing firmware will on the USB drive. This process is a "factory reset" for the hardware. If you need to recover files, do not use the MpTool; use data recovery software like Recuva or R-Studio first. Troubleshooting Common Errors "No Hub Found": Try a USB 2.0 port instead of USB 3.0.
Your drive should appear in one of the numbered slots.
This is the most comprehensive database. Look for the FirstChip FC1178/FC1179 MpTool page. firstchip fc1179 firmware link
FirstChip FC1179 Firmware: Recovery and Update Guide If your USB flash drive has suddenly become "Write Protected," shows "No Media," or isn't recognized by Windows at all, you likely need the and its associated mass production (MP) tool.
You will need this if the MP Tool doesn't automatically recognize your NAND memory chip. How to Flash the Firmware Flashing firmware will on the USB drive
Because FirstChip does not host a direct-to-consumer download portal, firmware is distributed through technician databases. You can find the latest on these reputable controller-fix sites:
Most users can leave this on "Default." If the drive isn't detected, you may need to go into "Settings" (password is usually blank or 123456 ) and ensure the FC1179 controller is selected. Troubleshooting Common Errors "No Hub Found": Try a USB 2
By using the correct and the MpTool, you can save a "dead" drive from the trash and restore it to full working capacity.
Your firmware version might be too old for your specific memory chip. Look for a newer version of the FirstChip MpTool.