Motomasterbatterycharger111567manual Fixed Full May 2026

A red light usually indicates a "sulfated" battery or a bad connection. Safety Troubleshooting Why is the Red Light Flashing?

The charger needs to "sense" at least 2 volts in the battery to begin the charging process. If your battery is at 0V, the charger may not activate.

Compatible with Lead-Acid (Standard, AGM, Deep Cycle) Operating Instructions: Step-by-Step 1. Preparation motomasterbatterycharger111567manual full

Always connect the clamps before plugging the charger into the AC outlet to avoid sparks.

The MotoMaster 11-1567-8 (often searched by its base model number 11-1567) is a staple in Canadian garages. Known for its reliability and "Simple Direct" interface, this 10/2A 12V charger is designed for both quick charging and long-term maintenance. A red light usually indicates a "sulfated" battery

Before connecting, ensure the area is well-ventilated. If the battery is inside a vehicle, turn off all electronics and remove the keys from the ignition. 2. Connecting the Charger

Use this for automotive, marine, and deep-cycle batteries that need to be charged quickly (usually 3–5 hours for a standard car battery). If your battery is at 0V, the charger may not activate

If you’ve lost your physical copy, this guide covers everything you need to know to operate the unit safely and effectively. Technical Specifications 11-1567-8 Input: 120V AC, 60Hz Output: 12V DC Charge Rates: 10A (Fast Charge) / 2A (Slow Charge/Maintain)