Quantum Resonance Magnetic Analyzer 300 Setup New Better -

This ensures the new drivers are fully integrated into the Windows registry. 3. Hardware Connection Once the software is installed: Connect the USB Cable from the analyzer box to your PC.

During installation, the wizard will ask to install "USB Serial" drivers. Click Yes . This allows your PC to "talk" to the sensing handle.

Check the cable connecting the handle to the box. Ensure the handle is being held firmly. quantum resonance magnetic analyzer 300 setup new

Enter the subject’s

Right-click the program, go to Properties > Compatibility , and set it to run for "Windows 7" or "Windows 10" depending on your OS. This ensures the new drivers are fully integrated

Launch the software by right-clicking the desktop icon and selecting 4. Setting Up a New Profile

The subject should hold the sensing handle in their palm (usually the left hand is preferred in holistic practice to be closer to the heart's frequency). During installation, the wizard will ask to install

The scan usually takes about 60 seconds. The subject should remain relaxed and avoid talking.

Plug the into the circular port on the front or side of the analyzer.

Tip: Be precise. The software uses these metrics as a control group to compare the captured frequencies. 5. Conducting Your First Test For the most accurate results with the 300 series: