Riso rz300ep: error a16-525 - Конференция StartCopy
: Some users find success by placing a small piece of matte black gaffer tape over the strip to improve light absorption. 3. Reset and Service Mode
: A used master master is actually stuck on the drum or failed to eject into the disposal box.
The is a common "service call" code on Risograph digital duplicators, typically indicating that the machine is awaiting master removal from the print cylinder . While it primarily signals that a used master is still attached to the drum when the machine expects it to be gone, it often appears as a "false" error even when no master is present. Common Causes of Error A16-525
: There is a small black velvet strip on the drum meant to absorb sensor light. If this strip is worn, dusty, or missing, the sensor detects reflection from the metal drum instead.
: Non-original "generic" silkscreens often use white plastic mesh. The sensor's light reflects off this mesh, tricking the machine into thinking a master is still attached.
: If using an aftermarket screen, use a black permanent marker (Sharpie) to darken the entire black strip and the area around it to ensure no light reflects back to the sensor.