Sunplus Loader Tool Updated ^new^ Site

The tool should show "Handshaking" followed by a progress bar indicating "Sending Data."

Bypassing "invalid file" errors encountered during USB updates. Key Updates in the Latest Version The updated tool addresses several legacy issues:

Better detection for the latest 1506 and 1507 series chips. sunplus loader tool updated

Select the COM port assigned to your adapter (check Device Manager). Baud Rate: Usually set to 115200 . Parity: Even . Operate Mode: Select Upgrade . 3. Load the Firmware

Master Guide: Using the Updated Sunplus Loader Tool for Satellite Receivers The tool should show "Handshaking" followed by a

Close any other programs (like PuTTY or other loaders) that might be using the COM port. Safety Tip

Click the or "File" button and navigate to your downloaded .bin firmware file. Ensure the file name is short and contains no special characters. 4. The Flash Process Click "Start" on the loader tool. Now, plug in the power cord of your satellite receiver. Baud Rate: Usually set to 115200

Enhanced compatibility with newer 1GB/2GB RAM configurations.

Do not touch the cables or turn off the PC until the tool shows "Upgrade Success." Troubleshooting Common Errors