Tgc Bc901h Manual Now

The is a wired remote controller specifically designed for Towngas instantaneous gas water heaters. It allows users to manage hot water settings directly from the bathroom or kitchen with precision and safety. Core Functions & Indicators

: If your unit supports a circulation loop, press the Pre-heat button to warm the pipes before use. The maximum pre-heat temperature is capped at 50∘C50 raised to the composed with power cap C for safety. Troubleshooting & Error Codes If the unit malfunctions, the will flash a specific number on the digital display. tgc bc901h manual

: Powers the heater on or off. Note that only the controller with "Priority" can shut down the unit while it is in use. The is a wired remote controller specifically designed

To ensure consistent performance and safety, follow these basic steps: The maximum pre-heat temperature is capped at 50∘C50

: Ensure the gas valve is fully open and the gas supply is not interrupted. Try turning the tap off and on again after 10 seconds to reset the ignition sequence.

: If the heater is idle for more than 10 minutes, "Priority" is automatically released, and the indicator will turn off.

: Glows when the water temperature is set to 50∘C50 raised to the composed with power cap C or above as a safety warning for potential scalding.