Ensure your device remains plugged in throughout the entire process. A power loss during an update can permanently damage the receiver's chipset. Step-by-Step Update Instructions
Use a standard USB stick. It is recommended to use one with no other files in the root directory to avoid errors.
A progress bar will appear. The process usually takes 2–3 minutes. The screen may turn blue or remain on a progress bar; do not turn off the device during this time.
The following guide details how to safely perform a using a USB flash drive. Preparation Checklist Before beginning the update, ensure you have the following:
Download the firmware (typically a .bin or .img file) and copy it directly to the root of your USB drive.
Run an to refresh your local TV channel list with the updated software's improved scanning capabilities.
Plug the USB stick into the USB 2.0 port on the front or back of the Vivax receiver.
After the update is complete, it is highly recommended to perform a to ensure all new settings are applied correctly. Go to Menu > System > Restore Factory Default . The default password is typically 000000 or 888888 .
The screen should display the update file found on your USB. Press OK on the remote to confirm.
Using the remote control, press the MENU button.
Ensure your device remains plugged in throughout the entire process. A power loss during an update can permanently damage the receiver's chipset. Step-by-Step Update Instructions
Use a standard USB stick. It is recommended to use one with no other files in the root directory to avoid errors.
A progress bar will appear. The process usually takes 2–3 minutes. The screen may turn blue or remain on a progress bar; do not turn off the device during this time.
The following guide details how to safely perform a using a USB flash drive. Preparation Checklist Before beginning the update, ensure you have the following:
Download the firmware (typically a .bin or .img file) and copy it directly to the root of your USB drive.
Run an to refresh your local TV channel list with the updated software's improved scanning capabilities.
Plug the USB stick into the USB 2.0 port on the front or back of the Vivax receiver.
After the update is complete, it is highly recommended to perform a to ensure all new settings are applied correctly. Go to Menu > System > Restore Factory Default . The default password is typically 000000 or 888888 .
The screen should display the update file found on your USB. Press OK on the remote to confirm.
Using the remote control, press the MENU button.
