Updated: Vw Polo 6n Dashboard Removal

There are usually two or three 10mm bolts located under the scuttle panel (where the wiper motor sits). You must remove these to release the dash from the firewall.

Pop the center cap/airbag unit off (two bolts behind the wheel). Carefully disconnect the airbag wire. Use a 24mm socket to remove the center nut and pull the wheel off. vw polo 6n dashboard removal updated

With the help of a second person, lift the dashboard up and out through the passenger door. Pro-Tips for Reassembly There are usually two or three 10mm bolts

Remove the screws located near the footwells and under the ashtray. Lift the gear gaiter and remove the surrounding trim to access hidden bolts. Pull the console back toward the rear seats. Step 3: Removing the Instrument Cluster and Switches Carefully disconnect the airbag wire

Remove the fuse box cover and the lower shelf/kick panel. This will expose the main wiring harness and the steering column mounting bolts. Step 5: Unbolting the Main Dashboard

Apply thin foam tape to the contact points where plastic meets metal before reinstallation.

I can then provide specific torque specs or wiring diagrams for your project.